Hello,
I have your ProSens meter with LCD display. It is used to measure of temperature and humidity (by the build-in probe) and also CO concentration (by external sensor which is connected to the universal input). How should I set the display, so it shows one value at the time and change it every 6 sec. for the next one constantly? I have choosen the "4 channels" mode, but I don't know how to make it switch.
Best Regards,
Nick Johnson
ProSens display
Re: ProSens display
Dear Nick,
First, choose the "Screen settings" and change the display mode for "1 channel" - it means thet every value is still measured, but only one is displayed. Then, set the "Swap [sec]" parameter for 6 sec.
Lest us know if everything works, please and feel free to contact us in any other cases.
Best Regards,
ProSens Technical Support
First, choose the "Screen settings" and change the display mode for "1 channel" - it means thet every value is still measured, but only one is displayed. Then, set the "Swap [sec]" parameter for 6 sec.
Lest us know if everything works, please and feel free to contact us in any other cases.
Best Regards,
ProSens Technical Support
-
Nick_Johnson
- Posts: 2
- Joined: 05 Jul 2017, 10:42
Re: ProSens display
Hi,
Everything works great now. Thank you!
Best regards,
Nick Johnson
Everything works great now. Thank you!
Best regards,
Nick Johnson